2/25/82  SOME THINGS ON DART TAPE  MARKED 2/25/82
		(EXPAND.F4, READRW.F4, ETC.)

1/27/82 SEE UDP:MUSIC4 FOR MOST 'HEART' FILES

1/25/82  MANY .DAT FILES (FROM TRANSITION PROGRAM) ARE ON UDP:MUSIC3.
      MOSTLY CREATED BY EXPAND.F4 (LOAD WITH READRW.F4)

8/81  FOR NEW DISTORTION PROGRAMS SEE DSY.CMD AND DSV.CMD.

DSY.CMD
DISTY,DPY,DSTY,RDFUNC,PLOT3[NEW,LCS],MSSIO[NEW,LCS]

DSV.CMD
DISTV,DPY,DSTO,RDFUNC,PLOT3[NEW,LCS],MSSIO[NEW,LCS]

THESE PROGRAMS FIRST READ A VECTOR FILE SUCH AS:

    1   55   49    1		N1 IS A COUNTER,
    2   55   53    0		  N2,N3 ARE X,Y COORDS.
    3   54   56    0		  N4 IS PEN UP(1) OR PEN DOWN(0)
    4   53   58    0
    5   52   66    0

THEN THE PROGRAMS READ A STANDARD 'FUNC' FILE.  THE FUNCTIONS USED
MUST BE 'SMOOTHED'.   (THE EXTENSION .FUN MUST BE TYPED.)

THE OUTPUT IS TO A .PLT FILE WHICH THEN IS PRINTED WITH ONE OF THE
VARIAN PROGRAMS (VM, VM15, VCLIP).
*****************************************************************

VARDST.CMD
VARDST,PLOT3[NEW,LCS],MSSIO[NEW,LCS]

THIS SEEMS TO BE A SIMPLE PRINTING PROGRAM.  IT USES VECTOR FILES AS ABOVE
AND OUTPUTS PLT.PLT FOR THE VARIAN.  ONLY THE X,Y SIZES CAN BE VARIED.

*****************************************************************
*****************************************************************
NEXT DESCRIBES A SERIES(OLD) OF PROGRAMS WHICH MAY BE USED TO TAKE TV PICTURES
AND THEN DISPLAY THEM OR PLOT THEM.  THEY MAY ALSO BE DISTORTED IN VARIOUS
WAYS AND ALSO PUT INTO A FORM ACCEPTABLE TO THE DRAWING PROGRAM WHERE THEY
MAY BE EDITED.

******  TO TAKE A PICTURE *******

RUN 'PLOTU.DMP'

DEVICE NUMBER TO TYPE IS ALWAYS '-7'.   (THIS GETS THE DSK.)


WHEN PROCESSING THE IMAGE THE FIRST NUMBER ASKED FOR SHOULD BE ABOUT .8,
THE SECOND ABOUT 1.44 AND THE THIRD 3.

GENERALLY IT IS A GOOD IDEA TO SAVE PROCESSED IMAGES WITH THE SAME NAME AS
THE UNPROCESSED ONES PLUS THE LETTER 'P'.



NEXT IS FROM TOP OF MANFRD.F4
C DISPLAYS AND PLOTS TVIOF PROCESSED FILES.

C  TYPE <CR> TO REPEAT LAST FILE READ IN.
C  TYPE  'X'  TO EXIT, TYPE  'SAVE'  TO SAVE FILE FOR DRAWING PROG.
C  TYPE  'T'  TO TYPE LIST OF ALL YOUR CURRENT INPUT.
C  TYPE 'FUNC NM'  WHERE NM = FUNC FILE NAME FOR DISTORTION FUNCTION.
C  TYPE 'STEP N'  WHERE N = STEPS DISPLACEMENT FOR 2ND AND 3RD RUNS.
C  TYPE 'CENTR F' WHERE F = CENTER FOR DISTORTION FUNC. (0 TO 1.0?)
C  TYPE 'CLEAR' TO REINITIALIZE DISPLAY.



-------------- ALL END IN '.DO' -----------
****** DO
RU TPN↔V5P↔P 45 45 1↔90 100 67 100 0 97 0 100 1↔↔↔↔↔↔
******* DOTVP ------  THIS MAKES SMALL FILES FOR TVD OR TVN.
LOA P←/DUMP %DPIC1,PIC2,LOOK↔
***** DOTVX
LOA TPL←/DUMP %DMANFRD,RDBIG,PX,PLTMAN,LINEW,LOOK[MSS,LCS]↔
****** DOTVZ
LOA TVD←/DUMP %DMANFRD,RDSML,PX,PICY,LINEW,LOOK[MUS,LCS]↔
***** DOTV  ---------- DOES THIS WORK???
LOA %DTVIOF/FORT,SCAHEX/FORT,AEJ/FORT,PLOU/FORT,CLPLST/FORT,TVMAC/MAC,ASDACT/MAC↔
****** DO2
RU TPN↔FUNC FX↔CENTR -103↔V5P↔P 45 45 1↔90 100 67 100 0 97 0 100 1↔↔↔R↔X↔
****** NPDDT
LOA TPN←/DUMP MANFRD,RDBIG,PX,PLTMAN,LINEW,LOOK[MSS,LCS]↔
***** NDDT
LOA TVN←/DUMP MANFRD,RDSML,PX,PICY,LINEW,LOOK[MUS,LCS]↔